Milk Bar™ Lamb/ Kid Ad Lib 27

When lambs and kids are drinking confidently from a gravity feeder, transition them into the larger group with the Ad Lib feeder. Fill as often as required.

How do I change my teats?
Pull the Milk Bar™ Teat into the feeder.
Push the tube into the back of the teat.
IMPORTANT! Do not use a non return valve on the tube. A non return valve increases the flow of milk and can leave calves at risk of digestive upsets.
Milk Bar™ Teats have a pull through design to sit snugly against the feeder wall for optimum hygiene. However, while this is the most hygienic system, it can also be difficult to change teats! Use a Teat Tool: This is by far the easiest method. The purpose designed Teat Tool plucks the teat from the feeder with minimal effort in seconds. Pull the teats out by hand: When removing by hand, make sure to either pull the teat directly down or up. If you try to pull the teat straight out, it will be a tough job! Cut the teats out: Make sure the blade is sharp and you use the knife away from you.

Make sure the teat slit is vertical!

Tube feeders can be fiddly to clean!
Do not remove the teats for cleaning but periodically remove the tubes from the back of the teat and soak in hot water and alkali detergent to remove the fat and protein from the tubes.

1. Rinse your teats with water.
2. Use an non-chlorinated alkali detergent, following the manufacturers instructions.
3. Using a brush, lightly scrub the outside of the teats making sure to bend the teats.
4. Rinse clean.

The Milk Bar™ Lamb/ Kid Ad Lib 27 comes with teats and tubes fitted and ready to use and is supplied with a lid.

Volume: 142L
Diameter: 900mm
Height: 600mm

Warranty: The feeder has a two year warranty with proof of purchase.
The warranty does not apply to consumable parts (teats, tubes).

Made from food grade polyethylene and U.V Stabilised for long life.

Milk Bar™ Teats are made from a natural rubber with no synthetic or oil based rubber.
NZ Pat Apps 757655 & 767633 PCT Patent Application NZ2020/050110 International Patents pending.